Connectors

Material tinned copper

Used to provide connection facility for earthing wire and terminal ground lugs.

¿¿

¿¿

¿¿

Any other Size/ length available on request

¿¿

AMP Picabond connectors provide an economical and reliable means of splicing multi-conductor telephone cable. The bodies are manufactured from tin-plated phosphor bronze and tin-plated brass with bonded polyester insulation Color coding of the insulation is provided to denote wire size and weather-resistant type. AWG (0.32 – 0.9mm), with pulp, paper or plastic insulation can be spliced. Lightweight and compact PICABOND splices reduce the space required over other splicing techniques by up to 33%. Straight, butt, tap and bridge splices can be made with these connectors.

In-line full pair splicing connector accepts self supporting drop wire pairs having conductor diameter from 0.50mm to 0.90mm with maximum insulation diameter of 3.2mm

Features:

• The in-line full pair connectors are designed to accept self-supporting drop wire pair cables.

• The connectors are designed for superior mechanical properties.

• A single crimp displaces the insulation and provides a cold solder equivalent connection, delivering low contact resistance.

• Pre-filled with sealant the Type 1 and Type 2 connectors offer excellent resistance to high humidity moisture and ingression and water penetration

• Pre-crimp feature prevents slipping of conductors after positioning in the connector, reduces craftsman’s fatigue and saves time.

• A heavy duty special parallel jaw plier is required for splicing operation

Discrete wire connectors (butt connectors) are ideally suited for all types of cables splicing needs. Use of simple tools and small splice bundle offer you the advantage of economy with the reliability you can depend on for many years Designed and built around proven insulation displacement connection (IDC) technique

Features:

• Reduced splice bundles leading to cost effective splicing solutions.

• Clear body permits visual inspection of joints

• Insulation Displacement Connection (IDC) provides solder equivalent joint

• No need for stripping of the insulation.

• Filled connectors provide excellent water and moisture resistance.

• Full range of products with 2 or 3 wires for straight, half tap or bridge splic

Types are available:- UYC, UYP, UY2P, UY2PD, UY2C, URC, UR2P,  UR2PD, UR2C, UCC Etc.

Standard Packing: 500EA/Box

Note: Crimping tool is available.

Features

• Built-in cut off blades trim excess wire while crimping. Trimming of the conductors is not required.

•  Insulation displacement Connection (IDC) provides solder equivalent joint. No need fo stripping of the insulation.

• Full wire range from 0.32 to 0.90mm diameter of conductors.

• In-built ports for easy pair testing without opening the spliced connector

• Transparent cover and base permit visual examination of wires while splicing

• Full range of products for straight, tap and bridging applications.

• Pluggable module for bridge splicing for rearrangement or transfer of working lines, without interruption of service.

• Pre-filled modules for protection from humidity and condensation.

• Spliced connectors, when applied with sealant box offer excellent moisture and water resistance.

Note:- Standard Packing: 200Ea/carton, 120EA/carton

Any other requirement on request.