Marking Protection

The two-piece

post manufactured by PXPL is meant for safety of vehicles to reduce personal injury, prevent road accidents by identifying accident prone areas and delineating the boundaries of the roads as indicated in The two-piece flexible marker post consists of a flexible, above ground post made from durable, non-discoloring polyethylene plastic to which reflective sheeting may be applied, and a durable tubular galvanized steel anchor. The post shall be capable of recovering from repeated vehicle impacts. The post is inserted and locks into the galvanized steel anchor without any additional fastening hardware. It is required that when the post is no longer serviceable it can be removed and a new post can be manually inserted that locks into the existing in ground anchor without fasteners and without requiring any further digging or anchor driving.

General requirements

The post shall be tubular in shape and Two and Quarter (2 ¼”) inches in diameter. A One and Three Quarter (13/4”) Inches diameter interior reinforcement tube shall be located and secured in the lower portion of the post. The upper about fourteen (14”) inches shall be flattened to an oval shape with at least Three (3”) inches in width at the major axis and by One (1”) inches at the minor axis.

The total above ground height of the post can be manufactured as required by the customer. The post is yellow in color and resistant to ultraviolet and infrared radiations. Reflective sheeting may be applied to the flattened area.

Material: Mild steel

Finish: Hot dip galvanized (BS 729)

Used to secure u guard steel

Material: mild steel

Finish: Hot Dip Galvanized (BS 729)
Used to protect cables, wires and joints running vertically along the sides of poles, walls and other structures.

Material: Made of pure aluminum (1mm) one side laminated with PE sheet.
Installed in the manhole entrance, marker post, distribution points etc for marking purposes.

Used for Marking & Identification of telecom Electrical cables and equipments.